The 18 Best Floor Jacks of December 2023

LOW PROFILE FRAME: For Easy Access Under Low Ground Clearance Vehicles

LIFTING CAPACITY: 6,000 lbs.

QUICK LIFT: Double Pump Pistons Raise Saddle To The Load Fast

BYPASS AND OVERLOAD VALVES: Prevents Over-Extension Of Hydraulic Ram And Jack Use Beyond Rated Capacity

STEEL SIDE PLATES: High Carbon Steel Side Plates Provide Increased Chassis Strength

COMPLIES WITH ASME PASE-2019 SAFETY STANDARD We put all our lifting equipment through voluntary and rigorous third party safety testing to ensure our products are among the safest in the market

3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle

Low Profile jack complies with ASME PASE/2014 Safety Standard

Complete with long two piece handle of Steel Hydraulic Service Jack for ease of operation and reduced operator fatigue.

Robust and durable steel body provides rigidity and stability. Points of the vehicleSwivel saddle for convenient positioning under the vehicle

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

Foam bumper on the handle helps protect your vehicle from damage

Built-in internal safety valve and vent plug ensures safe operation

Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch

3.5-ton/7,000 lb. lift capacity

Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H

Rugged universal joint for precise load control

Great for working in the garage and other outdoor activities such as picnics or ball games

Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

[Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle

[Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle

[Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle

[Durable Material and Easy Operation]Floor jack constructed of aluminum billet and welded steel frame assures high strength and duablility. Steel casters and swivel front casters for easy maneuverability, sturdy handle for convinient carrying

[Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you

REPLACES MULTIPLE JACKS: The patented Triple Lift design fits cars, trucks, motorcycles, ATVs, even transmission, lawnmowers and snowmobiles!

WIDE LIFT RANGE: From a low of 5-1/2 inches (with the round saddle removed) to a high of 17-1/2 inches with the round saddle installed.

ULTRA STABLE AND SECURE: Thanks to a wide wheelbase, the Triple Lift offers stability well beyond the average floor jack. For even more security, use the included tie-down loops with your tie downs to secure the load.

NO NEED FOR JACKSTANDS: Slide the included safety bar in place and the Triple Lift is locked in the raised position.

STRONG AND DURABLE: tested and certified to meet or exceed ASME and PALD standards.

Patented design features both a removable lift saddle and padded lift rails

Flexible design allows the Triple Lift to adapt to multiple types of vehicle frames

Easily lifts cars, trucks, ATVs or removing/replacing transmissions or differentials

Locking safety bar holds jack in place once raised eliminating the hassle of supporting a lifted vehicle with jack stands

Lifting capacity of 4,000 pounds and meets or exceeds ANSI standards

Extra low profile

Lifting range of 3-3/8 inches to 15 inches. The solid steel construction and safety release valve were features included to secure user safety

Patented bypass device protects against over pumping for safe operations

Built-in safety valve provides overload protection

Heavy duty steel construction provides long term durability

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles.Handle Length:24.5 inch

Single piston quick lift pump allows you to easily raise the jack to the desired height; Safety bypass system prevents over-loading and ensures safe operation.Rubber-tipped tongs

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8, 000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 3-7/8" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Features a built-in safety overload system prevents use beyond load capacity; Meets ASME safety standards and includes a 2 year limited manufacturer

Specifications:Hydraulic trolley jack features a 3 ton (6,600 lbs) capacity with lifting height from 5.1" to 18.3".Floor Jack saddle Diameter: 4 inch.With quick lift function.Its the best tool for car repairing and auto emergency treatment in garage,shop

Durable Steel Construtions:Heavy duty steel construction provides years of service.Equipped with rugged universal joint for precise load control.Premium stability allows the service jack to work for a long time on all kinds of roads

Safety Guarantee:Car jack comes with built-in internal safety valve and vent plug ensures safe operation.Padded handle provides vehicle protection when jack is lifting.Each floor jack has been rigorously tested to ensure the safety of work.1 Year Warranty guarantee for free return

Flexible Swivel Casters:Equipped with Pair 2" steel front casters and pair 2" 360-degree swivel casters (solid rubber material) for easy positioning of jack.Meets ANSI/ASME PASE safety standards.

Applications for Convenient Use:Widely used for car tire change.Lifting range & capacity fit for most cars, trucks, and SUVs.Please carefully check whether our products match your vehicle parameters before purchasing