The 15 Best Hydralic Floor Jacks of December 2023

COLORS MAY VARY: XL20 = A20015

LOW PROFILE FRAME: For easy access under low ground clearance vehicles.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

UNIVERSAL JOINT RELEASE MECHANISM: Provides precise control of jack.

STEEL CONSTRUCTION: For heavy duty use.

VEHICLE PROTECTION: Designed with a rubber saddle and a foam handle bumper.

2 PIECE HANDLE: Allows for easy storage.

BYPASS AND OVERLOAD VALVES: Prevents over-extension of hydraulic ram and jack use beyond rated capacity.

COMPLIES WITH ASME PASE-2014 SAFETY STANDARD: We put all of our lifting equipment through a voluntary and rigorous safety certification process.

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Rapid Pump: The high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for controlled descents of your load from any handle position.

Warranty: Meets international quality standards. 1 YEAR free-return guarantee, don't hesitate to call us if you have any questions, Bilt Hard support team is on standby for YOU.

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

Foam bumper on the handle helps protect your vehicle from damage

Built-in internal safety valve and vent plug ensures safe operation

Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch

3.5-ton/7,000 lb. lift capacity

Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H

Rugged universal joint for precise load control

Great for working in the garage and other outdoor activities such as picnics or ball games

Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Features a built-in safety overload system prevents use beyond load capacity; Meets ASME safety standards and includes a 1 year limited manufacturer

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, heavy duty steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-1/8" to 20" allows you can gain easy access under low-profile vehicles

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Features a built-in safety overload system prevents use beyond load capacity; Includes a limited 2 year manufacturer warranty

[Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle

[Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle

[Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle

[Durable Material and Easy Operation]Floor jack constructed of aluminum billet and welded steel frame assures high strength and duablility. Steel casters and swivel front casters for easy maneuverability, sturdy handle for convinient carrying

[Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you

3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle

Low Profile jack complies with ASME PASE/2014 Safety Standard

Complete with long two piece handle of Steel Hydraulic Service Jack for ease of operation and reduced operator fatigue.

Robust and durable steel body provides rigidity and stability. Points of the vehicleSwivel saddle for convenient positioning under the vehicle

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity

Constructed of durable, high-strength steel; Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles

Foam bumper on the handle helps protect your vehicle from damage

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 1.5 ton (3,000 lbs) capacity with a minimum lifting height of 5-3/5" and a maximum height of 13"; Ideal for most cars, trucks, and SUVs

Safety bypass system prevents over-loading and ensures safe operation

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Includes a plastic blow mold carrying case for easy storage when not in use; Includes a 1 year limited manufacturer warranty