The 15 Best Low Profile Floor Jacks of November 2023

LOW PROFILE FRAME: For Easy Access Under Low Ground Clearance Vehicles

LIFTING CAPACITY: 6,000 lbs.

QUICK LIFT: Double Pump Pistons Raise Saddle To The Load Fast

BYPASS AND OVERLOAD VALVES: Prevents Over-Extension Of Hydraulic Ram And Jack Use Beyond Rated Capacity

STEEL SIDE PLATES: High Carbon Steel Side Plates Provide Increased Chassis Strength

COMPLIES WITH ASME PASE-2019 SAFETY STANDARD We put all our lifting equipment through voluntary and rigorous third party safety testing to ensure our products are among the safest in the market

COLORS MAY VARY: XL20 = A20015

LOW PROFILE FRAME: For easy access under low ground clearance vehicles.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

UNIVERSAL JOINT RELEASE MECHANISM: Provides precise control of jack.

STEEL CONSTRUCTION: For heavy duty use.

VEHICLE PROTECTION: Designed with a rubber saddle and a foam handle bumper.

2 PIECE HANDLE: Allows for easy storage.

BYPASS AND OVERLOAD VALVES: Prevents over-extension of hydraulic ram and jack use beyond rated capacity.

COMPLIES WITH ASME PASE-2014 SAFETY STANDARD: We put all of our lifting equipment through a voluntary and rigorous safety certification process.

LIGHTWEIGHT ALUMINUM CONSTRUCTION allows you to roll jack around with ease

LOW PROFILE DESIGN lifts from 3 ½ to 19 ¼ inches

360 DEGREE ROTATING SADDLE allows for easier movement

RUBBER LIFT PAD prevents marring of surfaces

OPTIONAL JACK SKID available separately to use safely on dirt, gravel, and grass

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

Foam bumper on the handle helps protect your vehicle from damage

[100% LIGHTWEIGHT ALUMINUM] - Weighs only 58 pounds which is lightweight for easy portability.

[DUAL PUMP PISTONS] - Dual pump system for quick lifting (7 strokes to top under no load). Lifting range 3 3/4" - 19 1/4"

[VEHICLE PROTECTION] - Designed with a foam handle bumper to protect vehicle from damage

[2 PIECE "D" HANDLE] - "D" Side handle for easy positioning of the jack

[JACK PROTECTION]- Caster nut protected in a recessed frame. Also, front wheel axle protected by bumper bar.

3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle

Low Profile jack complies with ASME PASE/2014 Safety Standard

Complete with long two piece handle of Steel Hydraulic Service Jack for ease of operation and reduced operator fatigue.

Robust and durable steel body provides rigidity and stability. Points of the vehicleSwivel saddle for convenient positioning under the vehicle

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Features a built-in safety overload system prevents use beyond load capacity; Meets ASME safety standards and includes a 1 year limited manufacturer

Jack it Up: With 3 tons/6600 lbs strong loading capacity, VEVOR's 3 ton floor jack can help you raise your car for whatever reason. Replace a tire, change oil or maintain the brake, whether you are a professional, car enthusiast, or weekend DIYer to take matters into your own hands!

For All Your Lifting Needs: Min. Height: 3-6/11"/90 mm. Max. Height: 19-11/16"/500 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a dual parallel pump system allows you to lift to the highest in full 7 strokes. Speed up your process.

Light But Sturdy: Boasts heavy-duty steel and durable aluminum construction, VEVOR low-profile floor jack is sturdy to use and light to carry. It is equipped with 4 wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the design of the armrests on both sides is convenient for carrying and positioning.

Secure and Carefree: A rubber saddle and a foam handle bumper provide maximum protection to your vehicle! The 360° rotatable saddle can be detached and replaced. Thanks to the leverage principle, the 45" long handle makes lifting easier. With the two-piece design, the handle can be disassembled when stored, taking up little storage space.

Meet International Certifications: Comply with CE certification (2006/42/EC (EN1494, EN 12100)), UKCA certification (SI 2008 NO.1597(BS EN1494, BS EN 12100)), and ASME PALD-2014 STANDARD. Our jack features a built-in load system that avoids use beyond load capacity. And the excellent sealing system ensures your security and long-term use.

Tips: To prevent the handle from slipping out, loosen the limit bolt of the handle before use and tighten the bolt after the handle is fully inserted.

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, heavy duty steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-1/8" to 20" allows you can gain easy access under low-profile vehicles

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Features a built-in safety overload system prevents use beyond load capacity; Includes a limited 2 year manufacturer warranty

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity

Constructed of durable, high-strength steel; Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles

Foam bumper on the handle helps protect your vehicle from damage