The 17 Best Powered Car Subwoofers of December 2023

Single 12-inch Dual 2 Ohm EVL Series Loaded Subwoofer Enclosure (Ported Box)

Peak Power: 2,500 Watts | RMS Power: 1,250 Watts

Subwoofer is Pre-loaded and Wired to a 1 Ohm Final Impedance Load

Vented Design of Enclosure and Heavy Duty MDF Construction Allow for Maximum Bass

Enclosure Air Space: 2.00 Cubic Ft | Tuned @ 38 Hz

HIGH EFFICIENCY SUB-WOOFER FOR SMALL TO MEDIUM-SIZED ROOMS - The HTS 12 features a 12" front-firing long-throw woofer with Polk's proprietary Dynamic Balance Technology designed to fill your room with immersive, three-dimensional sound in great clarity

YOUR BEST BET WITH MODERN LOOKS & THUNDEROUS PERFORMANCE – The sleek rounded corners are a highlight, but this sub will surely take your movie & music experience up a notch with its deep rumbling bass from the in-built 200-watt amplifier (400W at peak)

POLK'S PATENTED POWER PORT TECHNOLOGY delivers deeper bass response with its turbulence-smoothing diffuser that transitions air flow from the speaker into your listening area minimizing any kind of distortion & delivering rich full-range sound everywhere

UNIVERSAL COMPATIBILITY & VERSATILITY – The sub comes with LFE & stereo line level inputs. Pair it with any of Polk’s Signature series 2-channel stereo speakers or create a complete home theater with S60 tower, S20 bookshelf & S35 center channel speakers

ALL CONTROLS ON THE REAR PANEL – Controls for volume, low pass filter and phase toggle for optimum bass levels (0 to 180 degree) are in close reach - right on the back of the subwoofer. The front has a clean rich look with detachable grille

Polk’s commitment & expert craftmanship with their use of advanced technology, master engineering, and innovation helps them bring out the BEST IN SOUND SYSTEMS AND SPEAKERS so you can SIT BACK, RELAX AND LISTEN WITH YOUR HEART

Enclosure Features: Rockville DV12K6D1 Dual 12" 4800w Car Audio Subwoofer w Plexi Sub Enclosure Box. Final Impedance: 1 Ohm. Peak Power Handling: 4800 Watts. Continuous RMS Power Handling: 1200 Watts. ¾” MDF enclosure with black carpet. 1” MDF where the subs are mounted.

Made with Sexy-Plexy! Plexi-glass front panel. LED with selectable colors (white or blue selectable) (The LEDs were designed to have a professional look for a show car). Show ready enclosure! We were given the challenge by our team to develop the nicest enclosure in the history of car audio and this is what we came up with.

We hope you all love it!. Bonded stapled and braced and it is strong as a beast. Vented enclosure (side firing). Pre-wired down to a 1 ohm final impedance. Copper push terminals. Vent dimensions: 1.77" x 11.57" x 15.75". Tuning frequency of enclosure: 35 .6Hz.

Sub features: 2.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer. Double Stacked 100 Oz High Quality Magnet. Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient.

Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Polypropylene (PP) Dustcap. Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire. Impedance: Dual 4-Ohm Voice Coils.

Vented Hole on T-yoke Enhances Heat Dissipation. High BL Magnetic Motor Gap. We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated. Cutout Diameter: 11.125” inches. Mounting Depth: 5.75” inches.

Frequency Response: 27 Hz - 1.5K kHz. 8mm T-Yoke + 8mm Washer. Sensitivity: 85dB. XMAX:22 MM (One way)

The Punch P300-10T is a universal "all in one" self-contained subwoofer enclosure with built-in amplifier for dropping Bass in any factory or aftermarket system

The 10" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier in a slim design enclosure - Dimensions: 13.3" x 21.7" x 7.9" x 4.8"

Featuring an adjustable 12db/Octave low pass crossover, built-in adjustable bass boost EQ, and built-in 0°/180° phase switch

The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems

Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.

800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.

Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.

Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.

Thermal Protection Circuit, Short Protection Circuit.

Overload Protection Circuit. Phase Switch: 0° or 180°.

Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.

Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m.

Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.

Note: Kindly refer User Manual before use

Rockville Rws12ca slim 1200 Watt 12" Amplified powered car Subwoofer Enclosure.

1200 watts peak power output. 300 watts RMS. 12" Super slim subwoofer.

Ultra stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steal basket.

High density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure.

Vented core magnet motor structure. 2" High temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz.

Magnet motor structure. Super slim sealed MDF enclosure design. Aviation grade black tweet Carpet with embroidered logo.

Black texture synthetic Leather front panel. Impedance: 4-ohms. Frequency Response: 38hz-500hz. Spl @ 1W/1M: 96Db.

Dimensions: 24" Length x 15" Height 4.37" Top depth x 6.65" Bottom depth. Built-in 300 watts RMS/ 1200 Watt mono block amplifier.

150Mv - 5V variable input level. 24Db low Pass Crossover frequency 50hz-250hz. Low level RCA inputs.

High level speaker level input with auto start music sense. RJ11 jack for dash mounted bass remote.

Power Handling: Peak: 550 watts RMS: 200 watts

PWM MOSFET Power Supply/Thermal Protection Circuit Remote Subwoofer Control Included RCA and High-Level Inputs

Delayed Soft Remote Turn On Adjustable Input Sensitivity

Variable Bass Boost: 0 - +12 dB Variable Low-pass Filter: 85 - 150 Hz

Constant Subsonic Filter: @ 35Hz Selectable Phase : 0 or 180 degrees

Fuse Rating: 25A x 1 Dimensions: 13.60" L x 9.60" W x 2.60" H (approx)

600 WATT POWER: Pyle’s 8" Amplified Low Profile Subwoofer System offers a maximum power of 600 watts. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your car music audio system

BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & a control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module

LOW PROFILE: With height of just 3", it's a perfect solution when space is an issue, it can easily fit under the seat of most vehicles! Total dimension is 12.8”x9.5"x3” & includes mounting hardware. A great addition to your car stereo sound system

HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual

LOW LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source

MB Quart RW-108A 600W REFERENCE Series 8" 4-Ohm Power Subwoofer Amplifier

Complete control of amplifier signal, essential when using two or more amplifiers

Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.

Stable power through the PC board with minimal heat generation

Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.

RMS Power: 150 Watts

Ultra-compact powered subwoofer system designed for tight locations

Dimension: 13 7/8 x 9 3/8 x 3 1/8

8-inch internal subwoofer

150-watt (RMS, 14.4v) power amplifier